Curt hitch install

[Modella]

I installed a Curt hitch today and got 5 bolts in, but one wouldn't thread, it probably needs a tap. It's a 2" hitch for carrying 2–3 mountain bikes, under 200 lbs. Should I worry about the 6th bolt?

 

[talkingheads]

5 bolts should be pretty secure, especially if they're twisted down correctly. but i think it's always best practice to have all the hardware installed as intended by the manufacturer.

 

[Modella]

5 bolts should be pretty secure, especially if they're twisted down correctly. but i think it's always best practice to have all the hardware installed as intended by the manufacturer.

Yeah, that's fair, I torqued the five bolts down properly, but I'll go ahead and tap the last hole soon, it is better to be safe and follow spec

 

[L.Capladi]

@Modella If the battery's good and it's still doing that, start hunting grounds and relays, dont guess, who knows, flaky connection maybe cos it sounds like it

 

[LazyEyes]

Better safe than sorry my guy, If the hitch is mostly secure with 5 bolts and the 6th hole just needs a tap to clear threads, its most probably fine for light loads like 2 - 3 bikes under 200 pounds. I'd still recommend tapping that hole and installing the last bolt to ensure maximum force and safety, especially on a hitch.

 

[InitialB]

Better safe than sorry my guy, If the hitch is mostly secure with 5 bolts and the 6th hole just needs a tap to clear threads, its most probably fine for light loads like 2 - 3 bikes under 200 pounds. I'd still recommend tapping that hole and installing the last bolt to ensure maximum force and safety, especially on a hitch.

Yep, or use a slightly larger bolt to ensure full security, especially since the hitch will see vibrations and side loads while driving.